Fishing
3447B
Fishing
30 degree Flush Mount Rod Holder Available in Black Nylon or White Nylon Length - 9-1/2" Tube I.D. - 1-5/8" Flange - 3-1/2" W x 4-1/4"L Fastener - 1/4" (3) Angle - 30°
NylonL: 9-1/2"
3448W
Fishing
Single Tube Rod Holder
Length: 12"
Tube ID: 1-7/8"
Made of White Polypropylene
3449
Fishing
90° Flush Mount Rod Holder. Made of Durable Nylon. Available in Black, Tan, and White.
Length: 8"
Tube ID: 1-5/8"
Flange: 2-3/8" x 3-3/4"
Fastener: #10 (2)
L: 8"
3750
Fishing
3/8" Rubber Tool/Rod Holder.
Base diameter 2-1/6" x 7/8".
Fastener #4(2)
Available in Black or White. Smaller sizes for fishing rods, small tools, shore cables, hose and boat antenna. Larger sizes for boat hooks, boarding ladders, flashlights,and oars. UV resistant material.
3752
Fishing
5/8" Rubber Tool/Rod Holder.
Base diameter 2-1/6" x 7/8".
Fastener #4(2)
Available in Black or White. Smaller sizes for fishing rods, small tools, shore cables, hose and boat antenna. Larger sizes for boat hooks, boarding ladders, flashlights,and oars. UV resistant material.
6171
Fishing
316 S.S./Nylon Flush Mount Rod Holder
Angle: 30 degrees
Length: 9"
Diameter: 2"
Flange Height: 4" x 3-1/4"
Flange Width: 3-5/16"
Cap: No
Fastener: 1/4"(3)
Black Vinyl Collar
6171B
Fishing
316 S.S./Nylon Flush Mount Rod Holder
Angle: 30 degrees
Length: 9"
Diameter: 2"
Flange Height: 4" x 3-1/4"
Flange Width: 3-5/16"
Cap: Yes
Fastener: 1/4"(3)
Black Vinyl Collar
6172
Fishing
316 S.S./Nylon Flush Mount Rod Holder
Angle: 15 degrees
Length: 9"
Diameter: 2"
Flange Height: 4" x 3-1/4"
Flange Width: 3-5/16"
Cap: No
Fastener: 1/4"(3)
Black Vinyl Collar
6172B
Fishing
316 S.S./Nylon Flush Mount Rod Holder
Angle: 15 degrees
Length: 9"
Diameter: 2"
Flange Height: 4" x 3-1/4"
Flange Width: 3-5/16"
Cap: Yes
Fastener: 1/4"(3)
Black Vinyl Collar
6173
Fishing
316 S.S./Nylon Flush Mount Rod Holder
Angle: 0 degrees
Length: 9"
Diameter: 2"
Flange Height: 4" x 3-1/4"
Flange Width: 3-5/16"
Cap: No
Fastener: 1/4"(3)
Black Vinyl Collar
6173B
Fishing
316 S.S./Nylon Flush Mount Rod Holder
Angle: 30 degrees
Length: 9"
Diameter: 2"
Flange Height: 4" x 3-1/4"
Flange Width: 3-5/16"
Cap: Yes
Fastener: 1/4"(3)
Black Vinyl Collar
6174
Fishing
316 S.S. 30 degree flush mount rod holder
Length - 8-5/8"
Flange - 3-5/16" x 4-5/16"
Tube I.D. - 1-5/8"
Fastener-1/4" (3)
P/N 6248 is the white vinyl replacement liner for P/N 6174
316 Stainless SteelL: Tube Length: 8-5/8"
6174B
Fishing
316 S.S. with full length black liner and cap.
Length - 8-5/8"
Flange - 3-3/8" x 4-1/4"
Fastener - 1/4" (3)
Tube I.D. - 1-5/8"
P/N 6247 is the replacement black vinyl liner and cap
316 Stainless SteelL: Tube Length: 8-5/8"
6175
Fishing
316 S.S. oval flush mount rod holder w/white liner
Length - 8-5/8"
Flange - 3-3/8" x 4-1/4"
Fastener - 1/4" (3)
Tube I.D. - 1-5/8"
6247
Fishing
Black vinyl replacement liner and cap for 6174B and S-096B.
Vinyl
6248
Fishing
White vinyl replacement liner for 6174 and S-096.
Vinyl
6271
Fishing
316 S.S. Studded Flush Mount Rod Holder
Angle - 30 degrees
Length - 9"
Tub Dia. - 2"
Flange (HxW) - 4x3-1/4"
Stud - 1/4" x 1-3/4"
Cap - No
-Mounting Hardware - Backing plate, washer, and 3 lock-nuts
-Under deck mounting, no visible mounting hardware on flange.
-Black Vinyl Liner
-Min. mounting thickness 3/4"
-3/4" threaded drain hole accepts 3/4" fitting (pipe-to-hose barb) Can use 3/4" x 1/4", 3/4" x 3/8" etc.
-Mounting jig available
6272
Fishing
316 S.S. Studded Flush Mount Rod Holder
Angle - 15 degrees
Length - 9"
Tub Dia. - 2"
Flange (HxW) - 4x3-1/4"
Stud - 1/4" x 1-3/4"
Cap - No
-Mounting Hardware - Backing plate, washer, and 3 lock-nuts
-Under deck mounting, no visible mounting hardware on flange.
-Black Vinyl Liner
-Min. mounting thickness 3/4"
-3/4" threaded drain hole accepts 3/4" fitting (pipe-to-hose barb) Can use 3/4" x 1/4", 3/4" x 3/8" etc.
-Mounting jig available
6273
Fishing
316 S.S. Studded Flush Mount Rod Holder
Angle - 0 degrees
Length - 9"
Tub Dia. - 2"
Flange (HxW) - 4x3-1/4"
Stud - 1/4" x 1-3/4"
Cap - No
-Mounting Hardware - Backing plate, washer, and 3 lock-nuts
-Under deck mounting, no visible mounting hardware on flange.
-Black Vinyl Liner
-Min. mounting thickness 3/4"
-3/4" threaded drain hole accepts 3/4" fitting (pipe-to-hose barb) Can use 3/4" x 1/4", 3/4" x 3/8" etc.
-Mounting jig available
PH-1
Fishing
Flush Push Pole Holder
304 S.S/Black Nylon
Full Circle
Lenth: 4-3/4"
Width: 2-1/2"
Cut out: 1-3/16" x 3-1/2"
Fastener: 1/4" (4)
Image is in closed position
PH-2
Fishing
Flush Push Pole Holder
304 S.S/Black Nylon
Half Circle
Lenth: 4-3/4"
Width: 2-1/2"
Cut out: 1-3/16" x 3-1/2"
Fastener: 1/4" (4) Image is in closed position
S-0098
Fishing
S.S./Nylon 30° Flush Mount Rod Holder
Made of S.S. and nylon
Length: 9-1/4"
Tube ID: 1-9/16"
Flange: 3-3/8" x 4-1/4"
Fastener: 1/4 (3)
Get the look of stainless steel without the price
S-0098B
Fishing
30°S.S./ Nylon Flush Mount Rod Holder w/ Black Cap
Length: 9-1/4"
Tube ID: 1-9/16"
Flange: 3-3/8" x 4-1/4"
Fastener: 1/4 (3)
S-094
Fishing
316 S.S./Nylon Oval Rod Holder
Angle: 30 degrees
Length: 9-1/2"
Diameter: 1-11/16"
Flange Height: 4-7/16"
Flange Width: 3-9/16"
Cap: No
Fastener: 1/4"(3)
S-094B
Fishing
316 S.S./Nylon Oval Rod Holder
Angle: 30 degrees
Length: 9-1/2"
Diameter: 1-11/16"
Flange Height: 4-7/16"
Flange Width: 3-9/16"
Cap: Yes
Fastener: 1/4"(3)
