Cabinet/Hatch Hardware
Cabinet/Hatch Hardware
316 S.S. Ladder Hinge
Tube Size - 1"
For use with Transom Ladders, welds to tubing
316 Stainless SteelCabinet/Hatch Hardware
316 S.S. Locking Draw Latch
Length: 3"
Width: 1-5/8"
Key Part#: S-0251KEY
Fastener: #8(4)
includes adjustable keeper/key not included
Cabinet/Hatch Hardware
90° Offset Cam Bar Made of 316 S.S. Length: 2" 1-3/4" x 2-5/16" Includes S.S. set screw to adjust distance on shaft. Length measured from center of shaft hole to tip of cam bar. Cams fit all compression handles & t-handle latches.
Cabinet/Hatch Hardware
Ball Studs Material - ZP Steel
Length - 1-3/16"
Ball size - 10mm
Thread - 5/16" - 18"
Cabinet/Hatch Hardware
304 S.S. Ball Stud
Ball size - 10mm
L: 1-3/16"
Cabinet/Hatch Hardware
Ball Stud Material - 304 S.S.
Length - 1-3/16"
Ball size - 13mm
Thread - 5/16" - 18"
Cabinet/Hatch Hardware
Stainless Safety Clip
Ball Size - 10mm
Cabinet/Hatch Hardware
Stainless Safety Clip
Ball Size - 13mm
Cabinet/Hatch Hardware
Stainless Safety Clip
Ball Size - 13mm
Cabinet/Hatch Hardware
Zinc Plated Steel Mounting Bracket
Length - 1-3/4"
Width - 5/8"
Height - 1-1/4"
Size - 10mm
Fastener #8 (3)
Cabinet/Hatch Hardware
Black Steel Mounting Bracket
Length - 1-3/4"
Height - 7/8"
Size- 10mm
Fastener -#8 (3)
Cabinet/Hatch Hardware
304 S.S. Mounting Bracket
Length - 1-3/4"
Height - 7/8"
Size- 10mm
Fastener - #8(3)
Cabinet/Hatch Hardware
Zinc Plated Steel Mounting Bracket
Length - 2-1/4"
Width - 3/4"
Height - 1-7/16"
size - 10mm
Fastener - #8(3)
L: 2-1/1" W: 3/4" H: 1-7/16"
Cabinet/Hatch Hardware
Black Steel Mounting Bracket
Length - 2-1/4"
Width - 3/4"
Height - 1-7/16"
Size - 10mm
Fastener - #8(3)
L: 2-1/4" W: 1/4" H: 1-7/16"
Cabinet/Hatch Hardware
304 S.S. Mounting Bracket
Length - 2-1/4"
Width - 3/4"
Height - 1-7/16"
size - 10mm
Fastener - #8(3)
L: 2-1/2" W: 3/4" H: 1-7/16"
Cabinet/Hatch Hardware
Black Steel Angled/Offset Mounting Bracket
Length - 2-1/4"
Width - 3/8"
Height - 1-1/4"
size - 10mm
Fastener - #8(3)
L: 2-1/4" W: 3/8" H: 1-1/4"
Cabinet/Hatch Hardware
Black Composite End Fitting for 10mm Ball
Fitting - Spring Retainer
Cabinet/Hatch Hardware
304 S.S. End Fitting
Ball Size - 10mm
Cabinet/Hatch Hardware
304 S.S. Mounting Bracket
Length - 2-1/8"
Width - 13/16"
Height - 1-1/16"
size - 10mm
Fastener - #8(3)
L: 2-1/8" W: 13/16" H: 11/16"
Cabinet/Hatch Hardware
Zinc Plated Steel Mounting Bracket
Length - 2"
Width - 1-1/4"
Height - 1"
size - 10mm
Fastener - #8(3)
Size-10mm Fastener-#8(3)
L: 2" W: 1-1/4" H: 1"
Cabinet/Hatch Hardware
Black Zinc Plated Steel Mounting
Length - 2"
Width - 1-1/4"
Height - 1"
size - 10mm
Fastener - #8(3)
Size-10mm Fastener-#8(3)
Cabinet/Hatch Hardware
304 S.S. Mounting Bracket
Length - 2"
Width - 1-1/4"
Height - 1"
size - 10mm
Fastener - #8(3)
Size-10mm Fastener-#8(3)
L: 2" W: 1-1/4" H: 1"
Cabinet/Hatch Hardware
304 S.S. Angle Mounting Bracket
Length - 2"
Width - 1-3/16"
Height - 1-1/8"
size - 10mm
Fastener - #8(3)
L: 2" W: 1-3/16" H: 1-1/8"
Cabinet/Hatch Hardware
Black Composite End Fitting with Snap Cap for 10mm Ball
Cabinet/Hatch Hardware
304 S.S. Flat Bracket 13mm
Length: 3-1/2", Width: 3"
Fastener: 1/4" (4)